12V touch sensor switch 5A touch dimmer For LED Bathroom Mirror Manufacturer JET003
描述
About this item
1. Touch sensing technology, easy and simple to operate.
2. It has background light for the touch switch board, it’s incorporated, when the connector power with the switch, the background light of the switch board will be on, and it’s also normally on.
3. Blue color for turn off the light, white color for turn on the light, very clear for you to observe.
4. No need to find where the switch is in darkness, just touch the light body, you can easily switch on or off and adjust the brightness.
5. This switch is an isolated touch sensor switch, it is suitable for the LED which has protection cover glass.
6. Suitable for home/hotel bathroom mirror use.
| Brand | Jane Eyre |
| Function | On/off+dimming |
| Memory | No-memory |
| Backlight | Black/blue |
| Volt | 12V/24V |
| Current | 5A |
| Maximum load | 60W |
| Country of Origin | China |
Q: Why does the touch switch stroboscopic during use?
I am a manufacturer of LED bathroom mirrors in Moldova. I bought a small batch of LED mirror touch switches from you, but found that the touch switches flicker very badly during use. Why is this? Do you specialize in low-quality switches?
A: Sorry for giving you such a bad experience in the trial order.
The stroboscopic flickering of the touch switch is actually because the frequency of the touch switch and the lLED switch power supply do not match. And the high probability is that the PF value of the switching power supply is too low, please don’t simply and rudely draw the conclusion that “your product quality is too poor”.
Among the products we produce, there are touch switches that are sold as a whole set, and touch switches that are sold separately.
If your factory does not manufacture LED switching power supplies, it is recommended to buy our complete set directly. The complete set means that the switch and power supply have been matched and linked together. In this way, there will be no stroboscopic problem, and it will save you the labor cost of wiring, and also avoid various losses caused by wrong wiring.
If you manufacture switching power supplies or have purchased LED switching power supplies from other suppliers, you only need to buy a separate touch switch from us, then it is recommended that you inform us the frequency of the switching power supply you use before placing an order with us, or you Directly send samples to us for testing, which can also avoid stroboscopic.
Q: Why is the time of the touch dimmer with a digital clock always inaccurate?
I am a buyer from Korea, we have not bought any touch sensor switches from your company, but I want to understand why the clock will go faster after only 6 months of using the touch switches ,which we bought from other suppliers. It is 2 minutes faster than the correct time, this is ridiculous!
A: Among all the styles of touch switches used in LED mirrors, the touch switch with a clock is currently the most likely to cause problems. The clock moves fast, which is actually related to the digital tube.
In the initial stage, many suppliers of touch switches used ordinary civilian digital tubes instead of industrial-grade digital tubes, so the time was not accurate enough. This brings trouble to the users. For this phenomenon some users don’t mind and keep the mirrors, but some users express strong dissatisfaction.
We suggest that in the future, before you place an order for this product, try to emphasize to the supplier that “the clock must be correct”. The product they deliver will be much better!
